Premium ISO Certified Solar Power Lighting Solutions for Durability

DesertPro Solar Mounting System in Saudi Arabia Project

[Factory Direct] DesertPro™ Ground Mount Solar System | Sand-Proof & 60°C Resistant (ISO9001 Certified Steel)

22,000 Tons

Monthly Capacity

10+ Years

in Middle East Projects

25-Year

Structural Warranty

Premium ISO Certified Solar Power Lighting Solutions for Durability

Specification

Engineered for Extreme Conditions

200 km/h wind resistance (tested in UAE)
0.5mm/year corrosion rate at 60°C + 85% humidity
30% faster installation vs. conventional systems
Sand-proof spherical bearings with dual sealing
Certifications: ISO9001, CE, TÜV, Saudi SBC 601

LIMITED OFFER: Free engineering consultation for projects over 10MW

Parameter	Standard Configuration	Custom Options
Material	SPA-H Weathering Steel (3.0mm thickness)	Q355BNH, S350GD+ZM275 (Zinc-Aluminum-Magnesium)
Wind Resistance	160 km/h (Standard)	200+ km/h (Reinforced Design)
Temperature Range	-40°C to +70°C	Special coatings for extreme conditions
Max. Span Length	8.5 meters	Up to 12 meters (truss design)
Warranty	10 years material, 5 years workmanship	25 years structural warranty (premium option)

Why 97% of Solar Projects in Middle East Fail at the Mounting System

Pro Tip: For Saudi projects, use Zn-Al-Mg coated option (+15% cost) to cut maintenance by 40% in desert-coastal zones with high salt.

Common Problems in Desert Environments

Sand infiltration causes bearing failure within 18 months
Thermal expansion deforms standard steel structures at 50°C+
Corrosion acceleration at high temperature + humidity
Foundation issues on sandy soil causing alignment problems

DesertPro™ Engineering Solutions

Dual-sealed spherical bearings with PTFE coating prevent 99.5% sand ingress
Pre-calculated expansion joints accommodate thermal movement up to 70°C
Zn-Al-Mg coated steel provides 20-year corrosion protection in extreme conditions
Helical pile foundation system designed specifically for sandy soil conditions

Why Source Direct from Our 35,000m² Factory?

Vertical integration: Steel coil to product under one roof
Advanced production: 6 automated lines, 98.5% precision
Quality control: 12 inspections, each component tested pre-shipment

Export: Shipped to 32 countries, 22,000+ tons yearly
Logistics: 40ft container optimization cuts shipping by 15%
After-sales: Technical team supports installation

Proven Performance: Projects in Extreme Conditions

Saudi Arabia | 100MW Ground Mount Project

Location: Riyadh, Saudi Arabia

Challenge: 52°C summers, frequent sandstorms

Solution: DesertPro™ with Zn-Al-Mg coating

Result: 28 months operational, zero structural failures

"Survived 2023 sandstorm, others failed." - Project Director, Saudi EPC

UAE | 50MW Desert Installation

Location: Abu Dhabi, UAE

Challenge: High salinity + desert conditions

Solution: Dual-coating + marine-grade fasteners

Result: 22% less maintenance cost vs. old system

Data: 2 years: corrosion 0.3mm/year (industry 1.2mm/year)

Your Trusted Solar Structure Partner Since 2015

Manufacturer of Solar mounts & cold-formed structures with a 35,000m² production facility.

10+

Years Experience

32

Countries Served

22K

Tons Annual Cap.

Our Engineering Team:

8 senior structural engineers with PV expertise
3 project managers for Middle East projects
On-site installation supervision offered

Core Manufacturing Capabilities:

6 automated lines for cold-formed steel sections
Advanced galvanizing line (up to 275g/m²)
CNC punching/drilling (±0.1mm precision)
1000-ton hydraulic press for custom parts
Full-scale testing lab (wind, load, corrosion)

Technical Approach:

We solve engineering issues, not just sell products. With 50+ projects in Middle East deserts, every shipment includes test reports & certificates. 40ft container loading optimization saves 15-20% on shipping. 78% of clients reorder within 18 months.

Ready for a Desert-Proof Solar Solution?

Get engineering drawings and ROI within 24h. No obligation, just expert advice.

GET YOUR FREE CUSTOM QUOTE NOW

Your data is secure. We never share it. 98% of inquiries get a response within 12h.

3

Simple Steps to Your Quote

24h

Technical Response Time

35%

Average Cost Savings vs Market

Frequently Asked Questions

What makes the DesertPro™ system highly resistant to sandy environments?

The system utilizes dual-sealed spherical bearings coated with PTFE, which effectively prevent up to 99.5% of sand ingress, significantly reducing bearing wear and failure common in deserts.

How does the mounting system handle extreme heat expansion?

It is designed with pre-calculated structural expansion joints that safely accommodate thermal movements at temperatures reaching up to 70°C, preventing deformation of the steel frames.

Which materials are recommended for high-salinity coastal desert zones?

For coastal areas with high humidity and salt content, we highly recommend the Zinc-Aluminum-Magnesium (Zn-Al-Mg) coated steel option. It delivers 20-year corrosion protection and reduces long-term maintenance costs by 40%.

What is the maximum wind resistance capability of your solar structures?

The standard configuration supports up to 160 km/h wind loads, while reinforced custom options are engineered and certified to withstand winds exceeding 200 km/h.

Are these structures compliant with Middle Eastern regional codes?

Yes, our systems are certified under international standards such as ISO9001, CE, and TÜV, and fully comply with the Saudi Building Code (Saudi SBC 601) requirements.